Residential fire sprinkler system

A FIREPEX ^® residential fire sprinkler system is designed to prevent flashover (total involvement of the fire) in the room of fire origin, where sprinklered, and to improve the chance for occupants to escape or be evacuated. FIREPEX fittings and RAUPEX^® UV Shield pipe can be used to install these systems, sometimes in conjunction with plumbing systems. REHAU FIREPEX residential fire sprinkler system serves the requirements for fire sprinkler systems as defined by National Fire Protection Association (NFPA) Standard 13D Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes and the International Residential Code Section (IRC) P2904.

What types of homes are covered by NFPA 13D? View fire sprinkler requirements in your state

Key benefits

Installation speed with flexible RAUPEX pipe, EVERLOC+ and FIREPEX fittings
Integrated mounting brackets with FIREPEX fittings
Better freeze-break resistance with RAUPEX pipe.
Pressure test immediately (no cure time)
25-year limited warranty

How it works

When the heat from a fire activates a fire sprinkler, pressurized water from the piping system is discharged.

Combining the flexibility of RAUPEX pipe and the security of EVERLOC+ fitting technology, our FIREPEX residential fire sprinkler system has all the same benefits as our installer-friendly PEXa plumbing system. The unique flexibility of PEXa pipe reduces the number of joints required compared to rigid piping systems, while also enabling the use of compression-sleeve fittings that provide superior flow and security compared to insert fittings. In addition, the FIREPEX fittings have an integrated mounting bracket that speeds installation.

FIREPEX is solely for use in fire sprinkler systems as defined by NFPA 13D and IRC P2904.

REHAU pipe and fittings are to be installed in accordance with this standard and the manufacturer’s recommendations.

Installation

Passive purge sprinkler system

As defined in NFPA 13D, passive purge systems serve a single toilet in addition to the sprinkler system.

Stand-alone sprinkler system

In a stand-alone system, as defined in NFPA 13D, the above ground piping serves only fire sprinklers.

Multipurpose sprinkler system

Multipurpose systems are defined in NFPA 13D and P2904 as a piping system intended to serve both fire sprinklers and domestic plumbing needs.

A multipurpose system integrates the piping connected to a water supply with sprinklers that automatically discharge water over a fire area.

All piping in a multipurpose system supplying sprinklers must be listed or conform to the piping specifications in NFPA 13D or IRC P2904.

Technical downloads

Check our database of up-to-date technical bulletins, specifications, submittals, product instructions and more.

Downloads

Product catalog

REHAU Building Solutions product catalog in a downloadable PDF file.

Catalog

Find a distributor

Ready to buy? REHAU products are sold exclusively through local, regional and national authorized distributors.

Find a distributor